|
Rapid acceptance of the Tiodize
Process for titanium led to an intensified research and development
of lubricants. The result was the introduction of the TIOLON and
TIOLUBE families of advanced anti-friction, anti-wear, MIL-spec
quality dry film lubricants for static and dynamic conditions.
TIOLON® is a family
of PTFE (Teflon®) based lubricants designed for light loads, friction
and wear surfaces as well as mold release applications.
This site offers basic representation
of a multitude of lubricants that TIODIZE has developed. From organic and inorganic
to low VOC, water based and high temperature applications, we are
constantly expanding our line to fit your needs.
TIOLON®
|
|
PTFE (Teflon®) Solid Film
Lubricants |
Oper
Temp |
Low
VOC |
Water
Base |
Lit.
Link |
|
Organic |
|
|
|
|
|
|
X-20 |
A low molecular weight PTFE, dispersed in solvent
for an excellent mold release |
425°F |
• |
|
Request |
|
A-20 |
PTFE suspended in an air cure thermoplastic resin for
low friction and light loads
NSN-9150-01-232-6884 |
250°F |
• |
|
Request |
|
E-20 |
PTFE dispersed in a thermosetting resin for longer
wear life and solvent resistance |
300°F |
|
|
Request |
|
S20 |
PTFE and MoS2 dispersed in a thermosetting resin to reduce friction
and prevent wear |
650°F |
• |
|
Request |
|
PTFE |
Fusible fluorocarbon that offers friction and corrosion
resistance at higher temperatures |
550°F |
• |
• |
|
|
Inorganic |
|
|
|
|
|
|
X-40 |
Thin film (.0001 to .0002) PTFE coating that provides
low friction and anti-galling qualities on all metals |
550°F |
|
|
|
TIOLUBE®
|
|
MOS2 (Molidisulfide)
Solid Film Lubricants |
Oper.
Temp |
Low
VOC |
Water
Base |
Lit.
Link |
|
Organic |
|
|
|
|
|
|
70
(AS 1701,
Class
II) |
Air
cure,thermoplastic resin bonded,MoS2 lubricant for field and touch up applications |
250°F |
|
|
Request |
|
460
(AS 1701,
Class
I) |
Heat
cure, MoS2 solid film lubricant
used for multi-purpose applications |
650°F |
|
|
Request |
|
20/20
(AS 1701,
Class
I) |
Heat
cure, MoS2, water base,
non-flammable, solid film lubricant - Low VOC
MIL-PRF-46010F |
400°F |
• |
• |
Request |
|
75/75
(AS 1701,
Class
II) |
Air
cure, MoS2, water base,
non-flammable, general purpose, solid film lubricant
- Low VOC
MIL-PRF-46147C TYPE I & TYPE II |
250°F |
• |
• |
Request |
|
Inorganic |
|
|
|
|
|
|
29
(AS 1701,
Class
V) |
Heat
cured, MoS2, non-flammable,
extreme environment, solid film lubricant |
850°F |
• |
• |
Request |
|
80-S |
High
temperature, hot heading lubricant designed not to load dies
in hot forming and extruding operations |
1800°F |
|
|
Request |
|
614-T7E
(AS 1701,
Class
IV) |
Heat
cured, high temp, anti-gallant lubricant for threaded fasteners
in jet engines. No metallics or sulfer compounds. GE approved |
1400°F |
|
• |
Request |
|
614-T9B
(AS 1701,
Class
IV) |
Heat
cured, high temp, anti-gallant lubricant for threaded fasteners
in jet engines. Pratt & Whitney approved |
1400°F |
|
• |
Link |
|
660-1
(AS 1701,
Class
VI) |
Heat
cured, non-flammable, anti-seize lubricant for threaded fasteners
in high temp applications |
1200°F |
|
• |
|
|
1175
(AS 1701,
Class
VI) |
Heat
cured, high temp, low outgas coating to reduce friction and
prevent galling in hostile environments |
1200°F |
|
• |
Request |
Specialized
|
|
Dry
Film Lubricants |
Oper.
Temp |
Low VOC |
Water
Base |
Lit.
Link |
|
T8E Paste |
Air
dry, high temp, anti-gallant dry film paste for threaded fasteners
in jet engines. GE and Pratt & Whitney approved |
1400°F |
|
|
|
|
WB50 |
Fast
air dry, non-flammable, cetyl alcohol lubricant for installation
of fasteners. No heat required |
_ |
|
|
|
|
