Advanced Coatings and Composites

BROCHURE REQUEST

Please place a check next to the brochures you would like shipped to you, fill out the shipping information, and click the submit button to have them sent free of charge.

Dry Film Lubricants

TIOLON® PTFE (Teflon®) Solid Film Lubricants			Oper Temp	Low VOC	Water Base
Organic
	X-20	A low molecular weight PTFE, dispersed in solvent for an excellent mold release	425°F	•
	A-20	PTFE suspended in an air cure thermoplastic resin for low friction and light loads NSN-9150-01-232-6884	250°F	•
	E-20	PTFE dispersed in a thermosetting resin for longer wear life and solvent resistance	300°F
	S20	PTFE and MoS2 dispersed in a thermosetting resin to reduce friction and prevent wear	650°F	•
	PTFE	Fusible fluorocarbon that offers friction and corrosion resistance at higher temperatures	550°F	•	•
	X-40	Thin film (.0001 to .0002) PTFE coating that provides low friction and anti-galling qualities on all metals	550°F
	FEP Green 850/856	Fusible FEP fluorocarbon that is chemically inert, solvent resistant and an erxcellent mold release	400°F	•	•

TIOLUBE® MOS2 (Molidisulfide) Solid Film Lubricants			Oper Temp	Low VOC	Water Base
Organic
	70 (AS 1701,Class II)	Air cure,thermoplastic resin bonded,MoS2 lubricant for field and touch up applications	250°F
	460 (AS 1701,Class I)	Heat cure, MoS2 solid film lubricant used for multi-purpose applications & in the SAE QPL for AS5272 Type II	650°F
	20/20 (AS 1701,Class I)	Heat cure, MoS2, water base, non-flammable, solid film lubricant - Low VOC & listed on the Army QPL for MIL-PRF-46010	400°F	•	•
	75/75 (AS 1701,Class II)	Air cure, MoS2, water base, non-flammable, general purpose, solid film lubricant - Low VOC & listed on the Army QPL for MIL-PRF-46147 TYPE I &TYPE II	250°F	•	•
Inorganic
	29 (AS 1701,Class V)	Heat cured, MoS2, non-flammable, extreme environment, solid film lubricant	850°F	•	•
	80-S	High temperature, hot heading lubricant designed not to load dies in hot forming and extruding operations	1800°F
	RL 580	Heat cured, MoS2, dry film lubricant for use in contact with oils	600°F		•
	614-T7E (AS 1701,Class IV)	Heat cured, high temp, anti-gallant lubricant for threaded fasteners in jet engines. No metallics or sulfer compounds. GE,MTU,SNECMA approved	1400°F		•
	614-T9B (AS 1701,Class IV)	Heat cured, high temp, anti-gallant lubricant for threaded fasteners in jet engines. Pratt & Whitney,GE,Rolls-Royce, MTU,SNECMA	1400°F		•
	660-1 (AS 1701,Class VI)	Heat cured, non-flammable, anti-seize lubricant for threaded fasteners in high temp applications	1200°F		•
	1175 (AS 1701,Class VI)	Heat cured, high temp, low outgas coating to reduce friction and prevent galling in hostile environments	1200°F		•

Specialized Dry Film Lubricants			Oper Temp	Low VOC	Water Base
	T8E Paste	Air dry, high temp, anti-gallant dry film paste for threaded fasteners in jet engines. GE and Pratt & Whitney approved	1400°F
	WB50	Fast air dry, non-flammable, cetyl alcohol lubricant for installation of fasteners. No heat required	_

Corrosion Protective Coatings

ALUMAZITE® Aluminum Pigmented Coatings			Oper Temp	Low VOC	Water Base
Organic
	Z	Heat cured, galvanic corrosion inhibitor for protection of fastening systems and dissimilar metal structures.	500°F
	Z-20	Heat cured barrier coating containing PTFE but without chromate pigments for reduced installation forces.	600°F
	ZAU	Air cured,low bake, thermal set, 2 part epoxy that prevents galvanic corrosion and is solvent resistant.	400°F
	ZDA	Air cured coating to combat corrosion problems associated with dissimilar metals in field applications.	500°F	•
	ZM-40	Heat cured, corrosion inhibiting coating with no chromate pigments for carbon steel	550°F	•
	ZY-132	Heat cured barrier coating containing PTFE to allow lower friction for reduced installation forces.	400°F
Inorganic
	ZT	Heat cured corrosion inhibitor designed to withstand oxidation and hostile environments from to 1600°F	1600°F		•
	ZY-139M	Heat cured, galvanic corrosion inhibitor with an inorganic binder for better adhesion to Monel.	650°F	•	•

Specialty Corrosion Control Coatings			Oper Temp	Low VOC	Water Base
Organic
	TICOMP 12	Dielectric, two part, high gloss, high build, elastomeric coating for abrasive wear and corrosion protection	400°F
	CC 105	Clear coat, hard finish for metallic surfaces	-	•
	B866/BR867	Airframe structure coating	260°F	•
	Z-329	Air dry, non-flammable corrosion inhibitor designed for aluminum aircraft interior surfaces	350°F	•	•
Inorganic
	Resistol	Heat cured, high temperature, barrier coating that protects titanium alloys from hot Skydrol. Also provides thermal control and dielectric properties.	1000°F

Shipping Information:

Name:
Title:
Company:
Address 1:
Address 2:
City:
State:
Zip:
Telephone:
Fax:
Email:

Click Submit and the selected brochures will be sent to your free of charge.

TIODIZE and all TIODIZE trade names on this website are trademarks or registered trademarks of TIODIZE Co., Inc.
All other trademarks or registered trademarks are the property of their respective owners.

Website Designed by: Light Visions Web Design

BROCHURE REQUEST

Dry Film Lubricants

TIOLON®

TIOLUBE®

Specialized

Corrosion Protective Coatings

ALUMAZITE®

Specialty Corrosion Control Coatings

Shipping Information: