Dry Film Lubricants

TIOLON®

Organic

X-20 - A low molecular weight PTFE, dispersed in solvent for an excellent mold release 425°FA-20 - PTFE suspended in an air cure thermoplastic resin for low friction and light loads NSN-9150-01-232-6884 250°FE-20 - PTFE dispersed in a thermosetting resin for longer wear life and solvent resistance 300°FS-20 - PTFE and MoS2 dispersed in a thermosetting resin to reduce friction and prevent wear 650°FPTFE - Fusible fluorocarbon that offers friction and corrosion resistance at higher temperatures 550°X-40 - Thin film (.0001 to .0002) PTFE coating that provides low friction and anti-galling qualities on all metals 550°FFEP Green - 850/856 Fusible FEP fluorocarbon that is chemically inert, solvent resistant and an excellent mold release 400°F

TIOLUBE®

Organic

70 - (AS 1701,Class II) - Air cure,thermoplastic resin bonded,MoS2 lubricant for field and touch up applications - 250°F460 - (AS 1701,Class I) - Heat cure, MoS2 solid film lubricant used for multi-purpose applications & in the SAE QPL for AS5272 Type II - 650°F20/20 - (AS 1701,Class I) - Heat cure, MoS2, water base, non-flammable, solid film lubricant - Low VOC & listed on the Army QPL for MIL-PRF-46010 - 400°F75/75 - (AS 1701,Class II) - Air cure, MoS2, water base, non-flammable, general purpose, solid film lubricant - Low VOC & listed on the Army QPL for MIL-PRF-46147 TYPE I &TYPE II - 250°F

Inorganic

29 - (AS 1701,Class V) - Heat cured, MoS2, non-flammable, extreme environment, solid film lubricant - 850°F80-S - High temperature, hot heading lubricant designed not to load dies in hot forming and extruding operations - 1800°FRL 580 - Heat cured, MoS2, dry film lubricant for use in contact with oils - 600°F614-T7E - (AS 1701,Class IV) - Heat cured, high temp, anti-gallant lubricant for threaded fasteners in jet engines. No metallics or sulfur compounds. GE,MTU,SNECMA approved - 1400°F614-T9B - (AS 1701,Class IV) - Heat cured, high temp, anti-gallant lubricant for threaded fasteners in jet engines. Pratt & Whitney,GE,Rolls-Royce, MTU,SNECMA - 1400°F660-1 - (AS 1701,Class VI) - Heat cured, non-flammable, anti-seize lubricant for threaded fasteners in high temp applications - 1200°F1175 - (AS 1701,Class VI) - Heat cured, high temp, low outgas coating to reduce friction and prevent galling in hostile environments - 1200°F

Specialized

T8E Paste - is a water base product. When applied, parts should be assembled within 45 minutesT8E-G LIGHT GREASE - is suspended in 7808 engine oil. This increases the shelf life, will not dry out, and allows for ease of application.T8E-H GREASE - is a heavier grease and is designed to replace graphite petrola¬tum grease (GE Spec A50TF201), especially for use at temperatures to 1400°FWB50 - Fast air dry, non-flammable, cetyl alcohol lubricant for installation of fasteners. No heat required
Download T8E Product Brochure pdf

Dry Film Lubricants

ALUMAZITE®

Organic

Z - Heat cured, galvanic corrosion inhibitor for protection of fastening systems and dissimilar metal structures. 500°FZ-20 - Heat cured barrier coating containing PTFE but without chromate pigments for reduced installation forces. 600°FZAU - Air cured,low bake, thermal set, 2 part epoxy that prevents galvanic corrosion and is solvent resistant. 400°FZDA - Air cured coating to combat corrosion problems associated with dissimilar metals in field applications. 500°FZM-40 - Heat cured, corrosion inhibiting coating with no chromate pigments for carbon steel 550°FZY-132 - Heat cured barrier coating containing PTFE to allow lower friction for reduced installation forces. 400°F

Inorganic

ZT - Heat cured corrosion inhibitor designed to withstand oxidation and hostile environments from to 1600°F 1600°FZY-139M - Heat cured, galvanic corrosion inhibitor with an inorganic binder for better adhesion to Monel. 650°F

Specialty Corrosion Control Coatings

Organic

TICOMP 12 - Dielectric, two part, high gloss, high build, elastomeric coating for abrasive wear and corrosion protection 400°FCC 105 - Clear coat, hard finish for metallic surfacesB866/BR867 - Airframe structure coating 260°FZ-329 - Air dry, non-flammable corrosion inhibitor designed for aluminum aircraft interior surfaces 350°F

Inorganic

Resistol - Heat cured, high temperature, barrier coating that protects titanium alloys from hot Skydrol. Also provides thermal control and dielectric properties. 1000°F

Shipping Information