Dry Film Lubricants
Rapid acceptance of the Tiodize Process for titanium led to an intensified research and development of lubricants. The result was the introduction of the TIOLON and TIOLUBE families of advanced anti-friction, anti-wear, MIL-spec quality dry film lubricants for static and dynamic conditions.
TIOLON® is a family of PTFE (Teflon®) based lubricants that are designed for light loads, friction, and wear surfaces as well as mold release applications.
This site offers basic representation of a multitude of lubricants that TIODIZE has developed. From organic and inorganic to low VOC, water based and high temperature applications, we are constantly expanding our line to fit your needs.
TIOLON®
| ID | Organic PTFE (Teflon®) Solid Film Lubricants | Oper Temp | Low VOC | Water Base | Lit. Link |
| X-20 | A low molecular weight PTFE, dispersed in solvent for an excellent mold release | 425°F | • | brochure-request | |
| A-20 | PTFE suspended in an air cure thermoplastic resin for low friction and light loads NSN-9150-01-232-6884 | 250°F | • | brochure-request | |
| E-20 | PTFE dispersed in a thermosetting resin for longer wear life and solvent resistance | 300°F | brochure-request | ||
| S20 | PTFE and MoS2 dispersed in a thermosetting resin to reduce friction and prevent wear | 650°F | • | brochure-request | |
| PTFE | Fusible fluorocarbon that offers friction and corrosion resistance at higher temperatures | 550°F | • | • | brochure-request |
| ID | Inorganic PTFE (Teflon®) Solid Film Lubricants | Oper Temp | Low VOC | Water Base | Lit. Link |
| X-40 | Thin film (.0001 to .0002) PTFE coating that provides low friction and anti-galling qualities on all metals | 550°F | brochure-request |
TIOLUBE®
| ID | Organic MoS2 (Molidisulfide) Solid Film Lubricants | Oper Temp | Low VOC | Water Base | Lit. Link |
| 70 (AS 1701,Class II) | Air cure, thermoplastic resin bonded, MoS2 lubricant for field and touch up applications | 250°F | brochure-request | ||
| 460 (AS 1701,Class I) | Heat cure, MoS2 solid film lubricant used for multi-purpose applications. Meets performance characteristics for the AS 5272 Type I & II (Not listed on QPL) | 650°F | brochure-request | ||
| 20/20 (AS 1701,Class I) | Heat cure MoS2, water base, non-flammable, solid film lubricant – Low VOC & meets performance characteristics for the AS 5272 Type I & II (Not listed on QPL) | 400°F | • | • | brochure-request |
| 75/75 (AS 1701,Class II) | Air cure, MoS2, water base, non-flammable, general purpose, solid film lubricant – Low VOC & meets performance characteristics for the AS 5272 Type I & II (Not listed on QPL) | 250°F | • | • | brochure-request |
| ID | Inorganic MoS2 (Molidisulfide) Solid Film Lubricants | Oper Temp | Low VOC | Water Base | Lit. Link |
| 29 (AS 1701,Class V) | Heat cured, MoS2, non-flammable, extreme environment, solid film lubricant | 850°F | • | • | brochure-request |
| 80-S | High temperature, hot heading lubricant designed not to load dies in hot forming and extruding operations | 1800°F | brochure-request | ||
| 614-T7E (AS 1701,Class IV) | Heat cured, high temp, anti-gallant lubricant for threaded fasteners in jet engines. No metallics or sulfur compounds. GE,MTU,SNECMA approved | 1400°F | • | brochure-request | |
| 614-T9B (AS 1701,Class IV) | Heat cured, high temp, anti-gallant lubricant for threaded fasteners in jet engines. Pratt & Whitney,GE,Rolls-Royce, MTU,SNECMA | 1400°F | • | brochure-request | |
| 660-1 (AS 1701,Class VI) | Heat cured, non-flammable, anti-seize lubricant for threaded fasteners in high temp applications | 1200°F | • | brochure-request | |
| 1175 (AS 1701,Class VI) | Heat cured, high temp, low outgas coating to reduce friction and prevent galling in hostile environments | 1200°F | • | brochure-request |
Specialized
| ID | Dry Film Lubricants | Oper Temp | Low VOC | Water Base | Lit. Link |
| T8E Paste | Air dry, high temp, anti-gallant dry film paste for threaded fasteners in jet engines. GE and Pratt & Whitney approved | 1400°F | brochure-request | ||
| WB50 | Fast air dry, non-flammable, cetyl alcohol lubricant for installation of fasteners. No heat required | _ | brochure-request |
Contact Tiodize Company, Inc.
Corporate Headquarters
5858 Engineer Drive
Huntington Beach, CA 92649
Tel: (714) 898-4377
Fax. (714) 891-7467
Sales & General Information:
E-mail: tiodize@tiodize.com
