ENVIRONMENTALLY/REACH Compliant Products
Low vac, aluminum filled corrosion inhibitive coating with Na CHROMATE PIGMENTS. Excellent adhesion to all metals and eliminates the commonly acknowledged dangers of hydrogen embrittlement or diffusion cracking as related to cadmium plating processes. Exceeds 3,000 hours of salt spray when applied over Zinc Phosphate Steel.
Low VOC corrosion protective coating that does not contain any metallics, chrome, or other hazardous materials. Exceeds over 1,000 hours of salt spray over bare steel. REACH COMPLIANT
An aluminum filled corrosion inhibitive coating designed to prevent galvanic corrosion. Contains NO CHROME PIGMENTS. Meets NAS 4006, MIL-C-85614, BMS 10-85
Air dry version of ZY-138.
An extreme environment high temperature solid film lubricant. Can be
used in hard vacuum, radiation, liquid oxygen, liquid hydrogen. Use on
fasteners, sleeve bearings, rocket engine hot gas valves, jet engine shafts,
bushings, etc. WATER BASE. Meets MIL-L-81329.
Low vac, low friction, heat cured corrosion resistant solid film lubricant with NO METALS or LEAD. WATER BASE. Use on fasteners, hydraulic fittings, bearings, gears, marine hardware, weapons, splines & shafts, nuts & bolts. Meets MIL-PRF-46010E, 46010b, AS 5272 Type III, AS1702, Class I
Air Cured version of 20/20. Low VOC, low friction, air cured corrosion resistant solid film lubricant similar to 20/20. Meets MIL-PRF-46147C Type I & II, SFL-09 Type I, SFL-10 Type II, AS 1701 Class I, MIL-L-23398
Solid film lubricant. NO ANTIMONY TIOXIDE NO LEAD OR LEAD COMPOUNDS REACH COMPLIANT Meets AS5272 TYPE I & TYPE II, AS 1701 TYPE I, MIL-L-46010
Tlolube 460 NL
Solid film lubricant that contains NO LEAD. REACH COMPLIANT Meets AS5272, MIL-PRF-46010, AS 1701 Class I
Inorganic Solid Film Lubricant
T8E, T8E-G, T8E-H
T8E Paste, T8E-G Light Grease,
Inorganic dry film antigallant paste designed to REPLACE SILVER on
threaded fasteners for use in jet engine applications. This is the
aftermarket version of 614-T9B.
Inorganic bonded fry film lubricant specially formulated to prevent
seizing of threaded fasteners in jet engines. REPLACES SILVER AT 1400
DEGREES. Meets PWA 36245, GE-A50TF303, AS 1701 Class IV
Low VOC corrosion inhibiting coating for aluminum. Used by Boeing,
Lockheed. WATER BASE. Meets OMS 2414, BMS 3-29, 3-35
Low VOC, non-flammable, cetyl alcohol lubricant.
WATER BASE. Meets MIL-L-87132B
WATER BASE cleaner/degreaser. The strongest water based degreaser
on the market. Used to degrease parts, shop floors, even used on oil rigs.
Gentle enough that it is used in FDA inspected facilities to clean wire.
REACH COMPLIANT NON-FLAMMABLE PTFE lubricant designed for
areas requiring release properties and low friction. Excellent for use in
injection molding applications. Available in non-flammable aerosol cans,
or bulk for spraying and dipping.